All guide pages
Welcome to DesignerXStudio launcher & favouritesSaving & My DesignsTemplatesExporting & printingShortcuts & everyday toolsDesignChiselLithophaneKeychainClickerMesh BoxBeads & Name CharmsChain MakerJewelleryClock MakerMesh BallCookie CutterOrnament MakerSnowflake MakerPegboard StudioBookmark Studio3D Model PainterDollhouse FurnitureVase MakerPlanter MakerMore tools & pagesTroubleshooting & FAQTwo tools sharing one compatibility profile: a pegboard designer (IKEA SKÅDIS-compatible, round, square, slotted, hexagon, grid, decorative or custom holes; any size, split into pieces that dovetail together) and an accessory designer (hooks, bins, shelves, tool racks, cable clips, cups, rods and mounting plates) whose pegs are made for that board and checked on real geometry.
How to use it
- On the Pegboard tab pick a board type, then the size, holes and wall mounting.
- Add spacers, ribs, a label or border, and set your printer bed so big boards split into pieces.
- On the Accessories tab check Fits this board (thickness, room behind, clearance).
- Pick a category and an accessory, choose a size and adjust its settings.
- Read the fit check, then Add to my board to see it in place, and download the 3MF or STL.
What you can do
Real fit check
Each accessory is seated in a piece of the board and tested for overlap, peg fit, insertion, lock and the room behind.
One profile
The board’s holes and the accessories’ pegs come from the same profile, so they always match.
Big boards
Boards larger than your bed print as pieces joined by dovetails that miss every hole.
Tips
Measure your board’s thickness and set it: pegs pass right through it.
Use PETG or ASA for hooks that carry weight, printed on their side as laid out.
Looking for the overview? See Custom 3D Printed Pegboards (Coming Soon).
Try it yourself
DesignerX is free to use in your browser. Create a free account to save your designs.